Sell LKB Wall Mold Mildew Remover Powerful Effect Spray Spot Remover Cleaner Mildewproof Anti-Mold 500ml 兰康保墙体除霉剂 best price

Features This mildew remover adopts a new technical formula, which can quickly decompose the wall mold, and the wall can be restored to its original color in 10-30 minutes without damaging the wall, and it can inhibit the regeneration of mold for a long time. Scope of application Mainly used for indoor and outdoor white walls, mold removal on the ground. use Removal of stubborn mildew and common molds on the wall, such as Aspergillus niger and Aspergillus flavus. Dosage The construction area is about 10 square meters, depending on the actual mold. Main ingredients Decomposers, oxidants, etc. Instructions 1. Put on a mask and gloves, and shake the product well. Adjust the sprayer nozzle to spray gear; 2. Aim at the moldy position and spray the mold remover uniformly, 20-30cm away from the moldy surface of the wall is best. 3. The mold can be removed within about 30 minutes after spraying, so that the surface of the wall is intact and the original color of the wall is restored. (The specific effective time depends on the environment). If there are many molds that cannot be completely removed at one time or the surface turns yellow, you can repeat spraying. 产品特点 本除霉剂采用新技术配方，能迅速分解墙体霉菌，10-30分钟即可让墙体恢复本色而不损伤墙体，长时抑制霉菌再生。 适用范围 主要用于室内外白色墙面，地面上的霉菌去除。 用途 墙体上的顽固性霉斑和普通霉菌，如黑曲霉菌，黄曲霉菌等高发性幕菌的清除。 用量 可施工面积10平米左右，具体视实际发霉情况而定。 主要成分 分解剂，氧化剂等 使用方法 1，佩戴上口罩和手套，将本品摇匀。将喷雾器喷嘴调整至喷雾档; 2，对准发霉位置均匀喷涂除霉剂，距离墙体霉变表面20-30CM最佳。 3，喷涂后约30分钟内霉菌即可除掉，使墙体表面完好如初，还墙体本色。（具体见效时间根据环境而定）。如霉菌较多，一次无法完全清除或者表面变黄，可重复喷涂。