500ml Wall Mold Remover Pembersih Kulat Kotoran Dinding Spray Mildew Spot Removal Cleaner Spray Biodegradable (1)
500ml Wall Mold Remover Pembersih Kulat Kotoran Dinding Spray Mildew Spot Removal Cleaner Spray Biodegradable (2)
500ml Wall Mold Remover Pembersih Kulat Kotoran Dinding Spray Mildew Spot Removal Cleaner Spray Biodegradable (3)
500ml Wall Mold Remover Pembersih Kulat Kotoran Dinding Spray Mildew Spot Removal Cleaner Spray Biodegradable (4)

Sell 500ml Wall Mold Remover Pembersih Kulat Kotoran Dinding Spray Mildew Spot Removal Cleaner Spray Biodegradable best price

4.8
18
ratings
38
sold
MYR 9.99
Brand
No Brand
Ships from
Perak

Product Description

*Ready Stock in Malaysia* Capacity: 500ml Features: This Wall Mold Remover adopts a new technical formula, which can decompose the mold on the wall. It can restore the original color of the wall in 10-30 minutes without damaging the wall, and inhibit the regeneration of mold by forming a protective layer Scope of application: Mainly used for indoor and outdoor white walls, mold removal on the ground. Purpose: Removal of stubborn mildew and common molds on the wall Dosage: The construction area is about 10 square meters, depending on the actual mold. Main ingredients: Decomposer, oxidant, etc. Instructions: 1. Wear a mask and gloves, and shake the product well. Adjust the sprayer nozzle to the spray position; 2. Aim at the moldy position and spray the mold remover uniformly, 20-30cm away from the moldy surface of the wall is the best. 3. The mold can be removed within about 30 minutes after spraying, so that the wall surface is intact and the original color of the wall is restored. (The specific effective time depends on the environment). If there are many molds that cannot be completely removed at one time or the surface is yellow, you can repeat spraying. PRECAUTIONS: 1. The product has some odor of disinfection water, but it is harmless to the human body, pets and can be used with confidence. 2. Spray more in places with severe mold, and reuse it if it is not cleaned at one time. 3. The wall surface turns yellow after spraying is a normal reaction, because the mold is not removed and can be reused once. 4. The product has a fading effect on clothes. Do not touch the clothes during use. Note: This product should be used up as much as possible. If it cannot be used up at one time, it is recommended to remove the nozzle and store it separately after cleaning to prevent the liquid from corroding the nozzle and affecting the use effect. #wallmoldremover #cleanwall #wallmoldspray #pembersihkulat #kulatdinding

Product Specifications

Warranty TypeNo Warranty

From the same shop

Related items

You may also like