Sell iFlight ProTek35 HD 151mm 3.5inch 4S 6S CineWhoop BNF with Beast F7 55A AIO/Caddx Polar Vista Digital HD System for FPV part best price
0
ratings
MYR 1,662 - MYR 1,783
Brand | Iflight |
---|---|
Ships from | Mainland China |
4s/6s | 4s 6s |
receiver | No additional Receiver Frsky XM+ Frsky R-XSR TBS Crossfire NANO RX iFlight R81 |
Product Description
Note: Protek35 BNF is available in black and yellow color, please leave a message if you need yellow, otherwise we will ship black by default,thanks!
Features:
1.ProTek35 Prop Guards V2.0
2.No Props or frame in view!
3.High performance True-AIO Board Beast Whoop F7 AIO 55A to save weight and space
4.T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
5.Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
6.Low Resonance frame construction (Less Jello, more Cinematic footage)
7.Caddx Polar Vista Digital HD System
8.Butter smooth 2203.5 3600KV (4S) / 2205 2300KV (6S)
9.Pre-tuned with smooth freestyle settings
PRE-TUNED & PRE-SETUP:
1.Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
2.To restore lost tunes or updates, please check our linked article on"Firmware/Factory Dumps"
3.Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
4.Please check our linked article on"How to disable Angle-Mode, activate Acro-Mode"
ProTek35 BNF Specs:
1.Board Beast Whoop F7 AIO 55A
2.Motor: XING 2203.5 3600KV (4S) / 2205 2300KV(6S)
3.Wheelbase: 151mm
4.Body Size: 118*94.5mmmm
5.Bottom plate thickness: 3.5mm
6.Top plate thickness: 2mm
7.Top and bottom plate spacing: 20mm (aluminum standoff height)
8.Propeller size: 3.5 inch
9.FC pattern: 25.5*25.5mm / 20*20mmmm
10.FPV cam spacing: 20mm
11.Weight: 348.3g (without battery)
ProTek35 HD Quad BNF Included Components and Parts
pre-built and tested Quadcopter
1 x ProTek35 Frame
1 x Caddx Polar Vista Digital HD System Kit
2 xAlbatross LHCP RP-SMA 5.8g antenna
1 x TPU Bracket forNebula Nano Air Unit
1 x TPU Antenna holder for DJI antenna
2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
1 x iFlight Lipo Strap 15*150mm (Color May Vary)
1 x iFlight Lipo Strap 15*250mm (Color May Vary)
1 x GoPro TPU bottom stand black (GoPro Protector not included)
Product Specifications
Weight | 350g |
---|---|
Warranty Duration | 1 Month |
Warranty Type | Manufacturer Warranty |
Bundle Set | Yes |
GPS | No |
Video Capture Resolution | 720p |
Maximum Flight Time | 9mins |