Sell iFlight Protek35 3.5 Inch 151mm 6S CineWhoop With RaceCam R1 Camera PNP Without Receiver P35PNP-6S best price
5
12
ratings
7
sold
MYR 1,030
Ships from | Perak |
---|
Product Description
iFlight Protek35 3.5 Inch 151mm 6S CineWhoop With RaceCam R1 Camera PNP Without Receiver P35PNP-6S
Changelog:
February 2021: Upgraded Prop Guards for more durability (Prop Guards V2.0, Material optimized)
April 2021: Upgraded Caddx.us Turbo Eos V2 2.1mm to RunCam Nano2 2.1MM
May 2021: VTX upgraded with different hardware (Same performance, upgraded TPU installation)
May 2021: Upgraded Beast F7 45A V1.0 to V1.1 (Circuit design optimized, Updated to BPS310 Barometer)
*Barometer can only be used with Betaflight 4.3.0 and above!
29 July 2021: RunCam Nano2 2.1MM NTSC 4:3 changed to RaceCam R1 Micro 1200TVL 1.8mm 14*14
Features:
– UPGRADED PROP GUARDS V2.0 (Material optimized)
– No Props or frame in view!
– High performance True-AIO Board Beast Whoop F7 AIO 45A v1.1 to save weight and space
– T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
– Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
– Low Resonance frame construction (Less Jello, more Cinematic footage)
– RaceCam R1 Micro 1200TVL 1.8mm 14*14
– Better smooth XING 2205 2300KV (6S) 12x12mm /Φ2 (Black)
– Pre-tuned with smooth freestyle settings
ProTek35 BNF Specs:
– Board Beast Whoop F7 AIO 45A V1.1
– Motor: XING 2205 2300KV (6S) 12x12mm /Φ2 (Black)
– Wheelbase: 151mm
– Body Size: 118*94.5mmmm
– Bottom plate thickness: 3.5mm
– Top plate thickness: 2mm
– Top and bottom plate spacing: 20mm (aluminum standoff height)
– Propeller size: 3.5 inch
– FC pattern: 25.5*25.5mm / 20*20mmmm
– FPV cam spacing: 20mm
– Weight: 305g (without battery)
FC // Beast F7 AIO 45A V1.1
Specification:
MCU: BGA-STM32F745
Gyro: MPU6000
Blackbox: 16Mb Onboard Flash
BEC output: 5V 2.5A
Barometer: DPS310
Connector: Micro-USB
OSD: AT7456E
FC Firmware:IFLIGHT_F745_AIO
Mounting pattern: 25.5*25.5mm φ3mm
Dimensions: 32.5*32.5mm
Weight: 8.5g
ESC // 45A 2-6S
Specification:
Uarts: 5
Current Sensor: Yes
Input: 2-6S LIPO
Current scale: 200
Constant: 45A / Burst: 50A
BLHeli: BLHeli-S
Telemetry: no
ESC Firmware: BlheliS G-H-30
Mounting pattern: 25.5*25.5mm/Φ3mm
Dimensions: 32.5*32.5mm
VTX// 5.8GHz SucceX Micro 600mW VTX (Adjustable)
-Power: PIT/25/200/400mW/600mW
-Antenna interface: MMCX
-VTX protocol : IRC Tramp
-Size: 29*29mm
-Mounting pattern: 20*20Φ3/25*25 mmΦ2
-Weight: 4g
Additional Suggested Parts (NOT including)
iFlight FPV Goggles with DVR Function
Battery 6S 95C 1300mAh
PNP Version: Without Receiver
Includes
Pre-built and tested Quadcopter
1 x ProTek35 Frame V1.2 Version (Motor mounting hole : 12x12mm /Φ2)
1 x RaceCam R1 Micro 1200TVL 1.8mm 14*14
2 x TPU camera side plate soft mount
2 x Nazgul 3535 propeller (Set of 4 – Color May Vary)
1 x iFlight Lipo Strap 15*150mm (Color May Vary)
1 x iFlight Lipo Strap 15*250mm (Color May Vary)
1 x GoPro TPU bottom stand black (GoPro Protector not included)
1 x EVA Cotton Strip
Note:
Battery, TBS nano RX, GoPro and GoPro mount NOT included