Sell 433MHz copying garage door remote control rolling shutter door electric rolling gate expansion gate universal remote control key 330hz 315MHz best price

433MhzCopying garage door remote control Rolling shutter door Electric gate Universal remote control key of retractable gate 330hz 315mhz Make sure your door is turned or rolled or retractable before buying 1. Flip door: please check the brand of the motor. If you don't know the name of the motor, please send it to us.There are special motors are not compatible 2 · book door or gate: open your remote control to see two parameters, frequency and chip, be short of one cannot chip if it is the two: 2260/226212264/1527/2240/2 w - 8, etc., which can be compatible Features: Type x: 60*30*10MM, Type Y: 70 * 37 * 10MM, waterproof case metal frame 2032 battery adopts imported chip, compatible with all fixed code (1527/2240/2260/2262/2264 compatible: doua 2w-8, baisheng T19, jetsi rolling code compatible: rolling code HCS101, universal rolling code, turning door remote control Color classification: waterproof - Y type 315Mhz waterproof - Y type 330Mhz waterproof - Y type 433Mhz waterproof - type X 315Mhz waterproof - type X 330Mhz waterproof - type X 433Mhz Finger black 315Mhz Finger black 330Mhz Finger black 433Mhz Finger white 315Mhz Finger white 330Mhz Finger white 433Mhz Instructions: 1. Clear code: two fingers at the same time hold the unlock key and lock key; the LED light rapidly flashes 3 times in about 2 seconds; let one of the fingers go (the other hand can not let go), and then use the loose finger to quickly click three times on the loose button until the LED light flashes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear code is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicats that the original code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code. 2. Copy: left hand taking the original remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will flash quickly 2 times; after one second, the indicator light keeps flashing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on original remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the original matching remote control.