Sell 330mhz SC2260 2262 Copy Auto Gate Remote Control SMC5326 chip 330mhz/433Mhz Clone Type (Free Battery) best price

Auto Gate Remote Control SMC5326 330/433Mhz Clone Type (Free Battery) Brand-new and Fast-copy Remote Control (Clone type) Can work with your existing 8 code switch remote Duplicate / Clone Type remote control Malaysia. Compatible with Chip model of SMC5326 AX5326 PT2262 PT2264 SC2262 SC2260 HS2262 2260 LX2262 2260 EV1527 PT2240 , with or without 8 code switch. Please confirm you are using frequency 330 or 433Mhz remote before purchase. Copying method: 1.Resetting: long press top two keys on the clone remote control at the same time until LED flicks, indicating the resetting is successful. After resetting, press any key of the remote control, and LED will be only short blink. 2.Copying: Place the original remote and clone remote SIDE BY SIDE or BACK TO BACK. Both hands click at the same time. Use right hand to long press the button you want to copy, until LED is on – off blinking, indicating it enters to copying status. Use left hand to long press the key of original remote control. The fast clicking of LED of remote control indicates success in copying. The copying method is the same as for several keys. 3.Tips: if you reset the code of remote control and want to recover, long press the bottom two buttons until LED light flicks. ********** WARRANTY : 1 month ********** 对拷的方法： 1、对拷前先清零操作：同时长按下遥控器上排两个按键(一定要同时按下才有效），见到LED灯亮下，然后熄灭，不要松开手直到LED灯闪烁则表示清零成功。清零成功后按遥控器按键，LED灯是亮下熄灭。 2、对拷：对拷前请注意产品的正确放置，应该将原遥控器与对拷型遥控器并排靠在一起放置在桌面。双手同时进行：用右手按下对拷型遥控器下箭头按键不松手，见到LED灯点亮下后熄灭，示意已进入拷贝状态，用左手快速按下原遥控器上相对应按键，见对拷遥控器LED灯快闪则对拷成功，多个键对拷方法相同。 3、使用小巧门：如果您不小心将对拷型遥控器的码清零掉了，您想恢复过来，就同时长按下排两个键不松手，见LED灯亮下后熄灭，不松手直到LED灯不停闪烁表示恢复已经成功了。 #auto #gate #autogate #remote #remotecontrol #duplicate #clone #5326 #330Mhz #433Mhz