Malaysia

SELLEYS EXPANDING FOAM NO MORE BIG GAPS FILLER 750ML

Selleys No More Big Gaps is an expanding foam, which cures into a semi-rigid closed-cell foam, making it ideal for filling large and irregular holes or cavities such as around pipes.

IDEAL FOR
- Timber, Brick, Concrete, Plasterboard, Particleboard, Fibre cement sheeting, Masonry, Ceramic Tiles, Glass, Steel, Aluminum, Most Plastics*

FEATURES
- Fast curing.
- Expands up to 2.5 times to fill those irregular and large holes around the home.
- Excellent insulator, and also blocks pests, noise, and birds.
- Convenient aerosol can, no mixing required simply spray into the gaps.
- Cured products can be cut, trimmed, sanded, and painted.
- Temperature resistance
- approximately -40oC +90oC.
- Suitable for interior and exterior use.
- Superior adhesion to a broad range of surfaces, resulting in a lasting finish.
- CFC-free ozone-friendly hydrocarbon propellant.

DIRECTIONS
1. Ensure the surface is clean, dry, and free from dust, grease, flaking/powdery paint, and old or crumbling caulk. For best performance, moisten surfaces by spraying with water (a plant sprayer is ideal).
2. Wear gloves and eye protection. The product is difficult to remove from skin and clothing.
3. Shake can vigorously for 60 seconds.
4. Screw the nozzle onto the can valve. Do not overtighten.
5. Turn the can upside down and gently apply pressure on the trigger to extrude the product. Vary the pressure to control product flow. Fill half the space.
6. Do not overfill as the product will expand up to 2.5 times its volume over several hours.
7. For extended usage continue to shake the can from time to time.
8. Clean up any oversprays and spillage immediately with a dry cloth. Acetone/nail polish remover will assist.
9. Product will be tack-free in 15 minutes and fully cured in approximately 4 hours. Once cured, the product can be cut back with a sharp knife or sanded with a sanding block.