Malaysia

Product description:
Use Meguiar’s M105 Mirror Glaze Ultra-Cut Compound to remove scratches, severe swirls/holograms, acid rain and other defects from your paint finish and leave it with a best-in-class mirror-like gloss. Our exclusive super micro-abrasive technology features ultra-fast cutting ability to remove 1200 grit or finer sanding marks. This professional grade formula is safe and effective on all glossy paint finishes, including clear coats.

Applying Meguiar’s M105 Ultra Cut Compound

Method 1: Applying by hand
Distribute a small amount of compound on a Meguiar’s Soft Foam Applicator Pad
Work in a 1-2 square foot area in a circular pattern, making 4-5 overlapping passes per section to ensure that the compound has been properly applied.
Without letting the product dry, use a fresh, clean Meguiar’s Supreme Shine Microfiber Towel to remove the residue. Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply in sections like this over the vehicle.

Method 2: Applying by Meguiar’s MT300 Dual Action Polisher
Attach Meguiar’s Red Foam DA Cutting Disc to the MT300 DA Polisher. Dispense a small amount of the compound directly onto the pad.
Set the MT300 DA Polisher speed between 4,800-5.800 OPM’s. Work in a 2’ x 2’ section applying 2 to 3 overlapping passes with moderate pressure, followed by light pressure for following 2 passes. Do not let product fully dry.
Wipe off the residue with a fresh, clean Meguiar’s Supreme Shine Microfiber Towel. Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply in sections like this over the vehicle.

Method 3: Applying by Rotary Buffer
Work one section at a time. Set rotary buffer to approximately 1000-1500 RPM’s.
Dispense a small amount of the compound directly onto the paint and begin working in a 2’ x 2’ area with overlapping passes. Continue working until a light film remains.
Wipe off residue before the product dries with a fresh, clean Meguiar’s Supreme Shine Microfiber Towel. Flip your towel to a clean side for a final wipe.
Reapply the compound if you didn’t remove the defects with the first application. Apply the in sections like this over the vehicle.