Malaysia

Product introduction:
Size: 30x8x5 cm
Weight: 1kg
Rated power: 3000W
Rated frequency: 50Hz
Voltage: 220V (Buy carefully if the household voltage does not match!!!)
Heating power: 2.1~5kW
Heating method: IPO non-metallic heating
Wire requirements: 1.5 square copper core wire
Waterproof rating: IPX4
Electric shock protection: Level 1
Starting water pressure: 0.04--0.06Mpa
Plug type: European plug (you can use it as a gift with \U.S. plug\)
Water temperature: up to 50 degrees
Water heater type: integrated
Control method: mechanical

Product packaging​​: 1 x household mini hot water

Product Tips: The temperature of the product is controlled by water flow. The greater the water flow, the lower the temperature. The smaller the water flow, the higher the temperature 💎

feature
-LED light, safety
-It only takes 2 seconds to supply hot water.
-Adopt patented technology to ensure the complete separation of water and electricity.
-Five protectors to ensure 100% user safety: double leakage protectors;
-Safety thermal cut-off; overvoltage protector; dry heat protector.
-Several heating power settings can meet different needs in different seasons.
-Heating power setting memory function: avoid repeated operation. Easy to use.

note
1. Hydraulic flow requirements
▲The machine is heated by the water pressure starting device, the starting water pressure is between 0.03Mpa-0.06Mpa,
▲According to the tested water, a 500ML Coke bottle can be filled within 25 seconds. Use this product normally (the test is for reference only)
▲If there is no municipal natural water at home, but water tanks, water towers, wells or non-tap water users and other self-built water supply facilities, and users whose water pressure is too low, it is not recommended to buy products.
▲It is forbidden to install any flow blocking components, such as water purifiers.
2. Line requirements
▲The power of this product is 3000W, which is the basis of the national CCC compulsory certification requirements and requires 1.5mm2 international copper wire.
3. Installation instructions
▲After the product is installed, please do not turn on the electricity to ensure the hot water during normal water supply, and then it can be used normally.
▲(Only for the first installation to prevent drying)