Malaysia


Description:
WIFI doorbell description:
1.3*18650 specification batteries(do not includes)
2.720P HD pixels collocated with 166 degree wide-angle lens

Specification:
Resolution:1280x720
Field of Angle View:166 degree
IR LED: 6x850mm
Wi-Fi: IEEE 802 11b/g/n
Audio: Two way talk with noise cancellation
Storage: 8G/16G/32G
Size Chart:
Bell:144mmX74mmX32mm
Package Includes:
1 set Bell (NO Ding dong BELL !）
Note:
Installation Guide：
1.Use the screws in the mounting kit to fit the bracket on the wall
2.The Conductive Screws in the accessories pack are used to connect the AC (16-24V) wire to the AC Input hole (if no AC power is available, this step can be omitted)
3.Mounting three 18650 specification batteries
4. Press the reset button for 5 seconds, waiting for the indicator light to slow down(The equipment should be in working condition, long press, sleep state is invalid)
5.Cover the battery cover, align the equipment and the bracket, push down and lock the security screws to   the installation

Setup Device
1.Downloading and Installing the App，Open the App Store (for iOS) or for Google Play Store(for Android) on your mobile devices. Search for "XSHcam" or scan
2. Setting up the App，Before you begin,Make sure the XSHcam app is installed to your device. > Make sure that your device is connected to a   Wi-Fi network, NOT a 5GHz network
3. The Wi-Fi Doorbell Features, In the device list section, please click settings icon which at the top right corner to enter the device settings
4. PIR Detection Instructions,The device can support the PIR detection. Tap "PIR detection" to open the submenus.
5. Cloud Storage,In the XSHcam APP setting menu, choose storage managment, and open Cloud Storage

