Malaysia

  
Features: 
This microwave motion sensor reflects the latest development in interior lighting technology and provides close to zero energy wastage in terms of lights being on unnecessarily. 
Commonly used to control lighting and extract ventilation.  
Power-saving by ensuring lights and fans are not left on. 
They will save energy by ensuring lights and fans not to be left on.  
The energy savings will be high with a short energy saving investment payback time if connected to average energy level lighting such as fluorescent tubes, or compact fluorescent lamps. Higher savings if controlling tungsten or halogen lighting. 
The time of the light can last or adjust automatically when you enter and stay in the room and the light will go out according to the time of your your setting when you leave the room. 
Pluggable type of the terminals which make easier and much convenient to install. 
Applicable to monitoring equipment,warning facility, LED lamp, fluorescent lamp, incandescent lamp, ventilator and magnetic valve and so on. 
Can be installed on wall, ceiling and anywhere of your house. 
Indoor use only 
 
Specifications: 
Installation sit: ceiling mounting 
power source: 220-240VAC 
Max load:800W 
Frequency: 50-60Hz 
HF system:5.8 GHz CW radar,ISM band 
Time setting: 10 seconds to 12 minutes 
Detection angle: 360 degree 
Working temperature: -15 to +70 C 
Ideal installation height: 2 - 4 meters 
Detection distance:2-10M(radius) 
Power consumption: 0.5 W 
Light control: 2-2000LUX 
Product size: 9.5x9.5x4cm/3.74x3.74x1.57inch 
Package size: 10*4.6*10CM 
 
Note: 
 Please allow 1-3mm differs due to manual measurement. 
-Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 
 
Package Include: 
1 x Microwave Motion Sensor Switch 
2 x Screws 
2 x Nylon expansion screws