Malaysia

Feature

* Evaporation function
* Automatic Trickle function
* Anti-anti-charging function
* Anti over-voltage overcharge function
* Power and energy
* Short circuit protection
* Short circuit protection
* Short start function overcharge
* Wide voltage range
* LCD Display

Description:
1. The three section type pulse charging

Constant current mode
*When the voltage of the battery is lower than the value set by the charger, the charger will work under the constant current mode and supply the constant current for the battery.

Constant voltage mode:
*Using the pulse width modulation (PWM) tech to control the charging current and output voltage of the charger which ensures the battery is fully charged and avoids over charging.

Floating charge mode:
*When the voltage of the battery is approaching the value of the constant voltage mode, and the current will cut down to the given current gradually, that means the battery power is full, then the pilot lamp will turn green and the fan will stop working. The charger will turn the mode into floating charge mode automatically. At this moment, the battery can be stopped charging or keep on floating charge for half an hour.

2. Charger smart panel
*Five kinds of charging mode selection,digital display charging current, charging voltage.

3. Anti-loss and current-limiting function
*Protect the charger and battery, greatly extend the life of the battery and charger.

Anti-loss function:
**When the charger is connected with the battery, the battery is prevented from being vulcanized to prevent the battery from losing water.

Current-limiting function:
**When the battery is charged full to continue charging is very dangerous, this charger can be based on the capacity of the battery, adjust the charging current when the switch on, protect the charger and battery.

4. Prevent anti-charge function

5. Microcomputer control and management
*Using micro controller MCU, intelligent control and management of battery charging, charger full of self stop.

6. Anti impact delay start function
*Can reduce the starting current and suppression of dramatic changes in the current flowing in a circuit, to prevent the high voltage impact and protect the charger and battery are not damaged.

7. Multiple safety protections
*With the battery online detection,input high voltage or high current protection,anti short circuit,
anti over charging, anti overvoltage and other functions.

Specification:
Max Charge Current: 5A ~ 6A
Applicable Battery Voltage:12V
Rated Input Voltage:110V ~ 240V
Rated Frequency:47Hz ~ 63Hz
Full Load Efficiency: ≥87%
Charger Mode:Three-phase(PWM charging mode)
Temperature Range: - 20℃ ~ + 90℃
Product Weight: 0.23kg
Product Size:153 * 60 * 80mm

Package Include:
1 x Car Battery Charger