Malaysia

Mix With Cement & Sand ( Water Resistant )

PENTENS LATEX-108 is an one-component, acrylic based liquid resin, mix with normal Portland cement or white cement, used as flexible adhesive, patching mortar, base coat and the water-resistant.

Uses
PENTENS LATEX-108 can only apply to sound, clean, dry, well prepared, frost-free surfaces. After mixing with cement, it may be used:
As a base coat for floor screeds
As a flexible adhesive for tiling, glazing
As a flexible patching mortar
As a concrete repair mortars
As a abrasion resistant linings
 
Advantages
Easy to use, only mix with cement on the job site
Excellent adhesion and durability
Crack resistance
Good flexural strength
Good impact strength
Freeze-thaw resistance
Vapor permeable
Low alkalinity
Excellent water resistance

Cleaning
Remove unhardened PENTENS LATEX-108 products from tools and equipment with water immediately after use. Hardened material can only be removed mechanically.

PENTENS LATEX-108 Flexibond contains cement and is alkaline. Suitable precautions should be taken to minimize direct contact with skin. Applicators are recommended to wear rubber gloves and goggles when using the material. If the material gets into the eyes, flush immediately with clean water and seek medical attention if irritation persists.