Sell YFGRC 1/10 RC Car Simulation Climbing Car Universal Metal Drive Shaft Axial for Trx4 Scx10 Series Drive Shaft best price

Weight: 85-120MM/45G 98-133MM/48G 110- 145MM/52G 122-160MM/55G Note: The mark size is from the shortest stretch to the longest shedding length. The usable length is 110-145MM, and the longest usable size is about 110-138. Features: Steel cross universal joint and ball-shaped wave ball design, the cross universal joint drive system has a higher load capacity and a larger transmission angle. At the same time, the cross universal joint system is also more simulated, which is the most used in real cars One way. Because the manufacturer specially designs different specifications of drive shafts according to different models, it highlights its professionalism! Players choose different drive shafts according to their vehicles! Traxxas TRX-4 is recommended to use 98-133MM at the front and 122-160MM at the back AXIAL series: AXI03006 SCX10 third-generation pickup truck front 85-120MM, rear 122-160MM AXI03007 SCX10 third-generation Wrangler 85-120MM at the front and 98-133MM at the back Axial capra recommends 98-133MM, the same before and after Axial SCX10 290MM wheelbase is recommended to use two 98-33MM Axial SCX10 305MM wheelbase is recommended to use 98-133MM two Axial SCX10 313MM wheelbase is recommended to use two 110-145MM Second-generation frame: Axial AX90047 front 98-133MM, rear 122-160MM Axial AX90046 front 85-120MM, rear 122-160MM Axial AX90060 98-133MM at the front, 122-160MM at the back Axial AX90058 98-133MM at the front, 110-145MM at the back Axial AX90059 98-133MM at the front, 110-145MM at the back Axial AX90104 313MM wheelbase is recommended to use 98-133MM at the front and 110-145MM at the rear Axial Ghost AX90018 90020 recommends using 122-160MM Axial　 AX90048 and AX90053 are recommended to use 98-133MM and 122-160MM each, the front is short and the back is long Axial　AX90075 98-133MM at the front, 85-120MM at the back Axial AX90074 98-133MM at the front and 110-145MM at the back GMADE series R1 is recommended to use 110-145MM and 122-160MM each RC4WD: 85-120MM is recommended for D90 four-door version TF2 98-133MM is recommended for TF2 (two-door version)