Sell Supergoodsales Optical Fiber Fusion Splicer - TFT Color Display Splicing Machine Optic Kit Welding with LED Auxiliary Light for SM MM DS NZDS Core/Fine/Cladding/Manual Alignment best price

--------------☀Welcome to Supergoodsales☀------------- ✔Good Quality✔Available✔Lowest Price ✈Shipping from oversea,items will arrive your home in 1-2 week. ⏩If you follow us and screenshot to us, you will have a free gift. ❀Please Enjoy Your Shopping Time↖(^ω^)↗ Feature: 1. Adopt ceramic fiber press hammer, durable for a long service life 2. Equipped with waterproof buttons, very practical in daily life use 3. LED auxiliary light bring clear lighting, easy to use at night, very convenient 4. Using good-quality electrode rod, possess of sharpness top, uniform discharge and lower loss 5. Made of good‑quality aluminum material, light and soft with good strength and good corrosion resistance Specification: Item Type: Fusion Splicer Material: Aluminum Model: GX39 Applicable Fiber: SM(G.652 and G.657)/MM(G.651)/DS(G.653)/NZDS(G.655) Continuous Loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS/NZDS) Control Technology: Real-time control and correction of welding arc; self-adaptation within working environment; self-adaptation of electrode oxidation Return Loss: Better than 60dB Typical Duration: 9 Seconds (standard SM) Typical Heating Time: 20 Seconds (heating time can be set, heater temperature can be adjusted), with rapid heating function Fiber Alignment: Fine alignment, core alignment, cladding alignment, manual alignment Fiber Diameter: Cladding diameter 80-150um, coating diameter 100-1000um Cutting Length: Coating Layer Below 250um: Approx. 8 ~ 16mm / 0.3 ~ 0.6in; Coating Layer 250-1000um: Approx. 16mm / 0.6in Heat Shrink Tubing: Approx. 60mm / 2.4in, 40mm / 1.6in and a series of miniature tubing Tension Test: Standard 2N (optional) Optical Fiber Clamp: Multi-function clamp, suitable for bare fiber, pigtail, jumper, leather cable, optional clamp, meet industry standard FTTX hot melt quick connector Magnification: 300 Times (X axis or Y axis); 150 times (X axis and Y axis) Display: 3.5-inch TFT color display, content can be flipped, convenient for two-way operation External Interface: USB2.0 interface, convenient for data download, using U disk to upgrade software Splicing Mode: 100 groups of user modes, 53 groups of factory modes Heating Mode: 40 groups of user modes, 11 groups of factory modes Continuous Loss Storage: 10,000 latest continuous results are stored in the built-in memory, and 100 sets of latest splicing images can be stored Built-in Battery: Lithium battery 12.5V power supply (10.8V storage), independent charger, charging time ≤3.5 hours; continuous welding, heating not less than 350 times (typical environment) Power Supply: Power supply adapter, External Adapter: Input AC100-240V 50/60HZ), output DC13.5V/4.8A) The current power mode can be identified, and the current battery capacity can be monitored in real time Working Environment: Temperature: -10-+50℃, Temperature: Less Than 95%RH (no condensation), Working Altitude: 0-5000meter, Can Resist Maximum Wind Speed: ≤15meter/s Built-in Lighting: Convenient