Sell STP ENGINE FLUSH FOR PETROL AND DIESEL ENGINE 450ML best price

STP ENGINE FLUSH SUITABLE FOR PETROL AND DIESEL ENGINE Even quality motor oils can form acids due to combustion by-product, high temperatures and oxidation. Grit and sludge-forming acid residue can remain in the crankcase even after draining the engine oil and replace the filter. Condensation and gasket leaks often cause pockets of water to accumulate in pits & crevices as it does not mix with oil during ordinary draining. This contaminated residue can affect the lubricant life and engine protection of the new oil Adding STP engine flush directly to the used motor oil prior to draining helps neutralise engine acids while it works to loosen and remove sludge,varnish and gum deposits that ordinary draining leaves behind. Water binding agent also allows STP Engine Flush to blind with water and flush out during draining process. STP ENGINE FLUSH contains an anti-wear additive to help protect engine surfaces during cleaning. TO PROPELY AND PROTECT YOUR PETROL OR DIESEL ENGINE: 1. Ensure oil in crankcase is up to normal level 2.Allow the car engine to run until it reaches normal operation temperature 3.Turn engine off 4.Add entire can of STP engine flush(treat from 3 to 6 liters of oil) 5.Start engine and run at fast idle for 15 minutes 6.Turn engine off and carefully drain oil while still hot 7.Replace oil filter.pour in good quality oil USE STP Engine Flush every oil change