Sell Soft99 / Soft 99 Heatproof Paint | Titanium / Black / Silver | Cat Tahan Panas | Original Soft 99 Made in Japan best price

This silicone resin paint is highly heat resistant, suitable for use on high temperature parts such as the muffler or around the engine. How to use the product 1. Remove dust, oil, burring, and rust from the area to be treated. Sandpaper may be used to achieve a superior finish. 2. Shake well each time before spraying. The internal ball bearing should make a noise. 3. Spray from 15-25 cm away. Do not attempt to spray all at once; spray thinly in parallel lines, using 2-3 layers to achieve an even finish. Wait 5 minutes between each layer. 4. Leave to dry for 1 hour. Final hardening ℃curs by heating. Drive for 1 hour to harden through heating. Do not touch before hardening. 5. To prevent clogging, discharge upside-down for 2 seconds, wipe the nozzle, replace cap, and store. Q It doesn't harden even if time passes… A This product is a paint that hardens completely by applying heat after natural drying. After painting, dry for more than 1 hour at room temperature (20℃), then start the engine, and run for at least an hour to complete the hardening by heat. Q Is Primer-Surfacer necessary as a base treatment? A Primer Surfacer is not necessary, but please degrease with Silicone Off before applying. Q Can I use it to paint the calliper part? A It cannot be used. Q Is the coating film formed by Heatproof Paint shiny or matte? A It is somewhere between matte and gloss.