Sell 【Ready stock】❀yal 360° Microwave Radar Sensor Embedded Motion Detector Ceiling Light Switch 220V best price

360° Microwave Radar Sensor Recessed Motion Detector Light Switch 220V-240V Ceiling Body Motion Detector for home The switch can sense the movement signals of people and objects, and can also penetrate the door, lampshade, glass, wall, and object to trigger the load after monitoring the moving object (monitoring, alarm device, LED lamp, fluorescent lamp, incandescent lamp, solenoid valve, etc.) jobs. And the sensing distance, light perception, sensitivity is adjustable, the sensing performance is not affected by temperature and humidity, and the sensing is sensitive and stable. Widely used in lighting, security, defense and other areas requiring intelligent control. Product parameters Specifications: Rated load current: 10A (1200W resistive load (incandescent), 300W inductive load (LED, fluorescent and other appliances); Photosensitive adjustment: Inductive illumination can be adjusted at night or during the day; Delay adjustment: adjustable from 10 seconds to 30 minutes (all with precise dialing adjustment); High sensitivity; any slight movement of the person in the sensing area will cause the sensor switch to automatically delay without delay! Input voltage: 220-240V AC; 50/60Hz Induction range distance: adjustable from 2 meters to 10 meters (radius); Induction angle: 360 degrees; Can be applied to any load: monitoring, alarm equipment, LED lights, fluorescent lights, incandescent lights, exhaust fans, solenoid valves, etc.; Installation: Embedded ceiling mount, can also be installed to the panel switch position or hidden to install anywhere. Installation method: embedded, ceiling opening diameter 83-88mm Microwave frequency: 5.8GHz +/-75MHz Transmission power: <10mW Dial key function description: The black dot in the side comparison table of the product represents the position of the dialing code. 1,2 key touch sensing distance 3, 4, 5 key delay (how long after the person leaves power off) 6,7,8 key sensitivity, adjusted to 24H for all-weather sensing, Adjust to the 10 LUX position to sense in the dark environment. The larger the value, the smaller the effect of light on the induction. Generally, it is adjusted to 50 LUX during normal use (6 times, 7 on 8) Wiring instructions: 220V power supply line switch L hole (optional one of 2 L holes), 220V neutral line N hole, lamp (or other electrical appliances) connected to L' hole (optional one of 2 L holes), The other line of the lamp is also connected to the N-hole. The N-hole is a common hole for the zero line. The switch enters the normal sensing state 20 seconds after the first power-on. Package included: 1 * Microwave Radar Sensor