Sell [READY STOCK] 300g/500g/1kg Waterproof Glue Wall Tile Window Sill Stable Film Leakage Protection Film bathroom coating best price

Function: This product can be directly painted on the wall/ceramic tile/stone/cement foundation, not peeling/powder, effectively prevent the substrate seepage, long service life.Safe operation, simple and convenient construction, cost-effective Product characteristics: waterproof, mould proof and antifouling Film color: transparent Water resistance: excellent Liquid type: water emulsion type Origin: China Specification classification: 300g / 500g / 1kg usage method: 1. Clean and dry the surface first 2. Use a brush to evenly apply it horizontally 3. Wait 12 hours for the second time of longitudinal painting 4. When the waterproof glue is dry, it can contact with water Precautions: 1. Avoid contact with children and contact with eyes. Rinse immediately with plenty of water and seek medical advice. 2. Store without direct sunlight and high temperature. 3. The waterproof glue must not be exposed to water before it is dry, otherwise it will turn white and fall off. 4. A thin layer should be applied each time, and it can be continued after drying. It should not be too thick, otherwise it is difficult to dry. Dosage reference: 300g-Available in 1.8 square meter range 500g-Available in 3 square meter range 1kg -Available in 6 square meter range #Transparent waterproof adhesive #exterior wall roof waterproof agent #waterproof material #waterproof repair -------------------------------------- 功能：本产品可直接涂在墙面/瓷砖/石材/水泥地基上，不剥落/散粉，有效防止基材渗漏，使用寿命长。操作安全，施工简单方便，性价比高 产品特性：防水 防霉 防污 漆膜颜色: 透明 耐水性: 优 液态类型: 水乳型 产地: 中国 规格分类: 300g防水胶 / 500g防水胶 / 1kg防水胶 使用方法： 1.先清理干净表面污渍，并保持干燥 2.使用刷子均匀的横向涂在上面 3.等待12小时纵向涂刷第二遍 4.等防水胶干燥即可接触水 注意事项： 1.避免孩童接触，不慎入眼，马上使用大量清水冲洗并就医 2.在无阳光直射，无高温下储存 3.防水胶未干前一定不能遇水，否则会有发白脱落现象 4.每次涂刷时要薄薄的一层，干燥后才能继续涂刷，不能太厚，否则难以干燥 用量参考： 300g------1.8平方米 500g------3平方米 1kg-----6平方米