Sell QUINX PLA+ 3D Printer Filament - 1kg / 1.75mm best price

Ready Stock! Please contact us if you'd like to opt for self-pickup/by delivery services (Lalamove, Grab, etc.) Product Description: - 2x tougher than normal PLA whilst not being brittle - Better layer adhesion - Increased colour vibrancy and solidity - Low gloss, more matte - Smoother surface quality - Extremely low shrinkage rate - High dimensional stability - Biodegradable Model: PLA+ Diameter Format: 1.75mm Tolerance: ±0.02mm Print Temp.: 200-230℃ Print Speed: 30-90mm/s Hot Bed Temp: None or 50-60℃ N.W.: 1kg G.W.: 1.3kg FAQ Why can't the filaments stick to the hotbed easy? 1). Check the temperature setting before printing, PLA+ filament temperature about 200-230℃; 2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue, or clean the bed with IPA or warm soapy water. 3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate Tips: 1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2).Be sure to insert the free end of the PLA filament into the spool side holes to avoid being tangled for future use. 3). If there is no print plan within a few days, retract the filament to protect the printer nozzle. "Others" shipping option is for self-collection only