Sell quick splice terminal Heat Shrink Crimp Terminals Cold-pressed wiring connector water resistant waterproof Butt Splice Joint 100pcs best price

Supplied with boxes if Quantity ≥100 pcs,without boxes ≤100 Features 1.The product shell uses high-strength HDPE rubber-containing double-walled hot water pipe to form a contraction under high temperature and tightly wrap the wires. 2.No adhesive tape is needed to avoid the failure of the adhesive tape due to improper operation. The conductive contact fires. The interface can prevent rat from biting. 3.The two ends are convex, and the whole tends to be straight. It is suitable for more narrow spaces. The internal middle partition prevents the two ends from entering the wire with the same length. 4.The inner copper pipe is made of galvanized copper, which has good corrosion resistance and excellent electrical conductivity. One docking, long-term peace of mind Specifictions Material: bare tube (polyolefin material) bare terminal (tinned copper) Use line type: both soft and hard Operating temperature: -55 ° C-125 ° Minimum shrinking temperature: 100 ° C Full shrinkage temperature: 180 ° C Shrink ratio: 3: 1 How to use 1. Prepare the terminals and peel off the outer sheath of the wires that need to be connected 2. Insert the wire into the terminal 3. Use pliers to clamp the recess so that the wire and the contact clamp are in close contact. 4. Applicable hot air gun or lighter to heat the heat shrinkable tube to shrink and wrap the wire to complete the wiring.