Sell PRO-SPEC SILICONE SEALANT ACETOXY CURE PS200 280G ( WHITE, CLEAR ) / WITH CAULKING GUN best price
0
ratings
MYR 9.5 - MYR 20
Ships from | Penang |
---|---|
Package | White Clear Gun White X Gun Clear X Gun |
Product Description
SILICONE SEALANT ACETOXY CURE CLEAR / WHITE
-FAST SKINNING AND CURING
-GOOD FLEXIBILITY
-EXCELLENT ADHESION TO GLASS , MOST METALS , PLASTICS
Is suitable for non-structural glazing and general sealing between non-porous components such as glass , ceramic , aluminium and anodized aluminium .In addition to the unique features of silicone rubber ,it has superior high and low temperature resistance , water resistance and outstanding weatherability .It also provides excellent adhesion to glass , metal and numerous construction materials .
多用途硅酮胶 一种多功能的粘胶有效于非结构性或不平玻璃或密封功能 。例如玻璃,陶瓷,铝。拥有优越的抗高低温,防水与耐不同气候。它的优秀粘附力也适合玻璃,金属和许多建筑材料。
DIRECTIONS :
- Surface must be clean and dry. Remove all dirt, oil, grease, detergents and loose material.
- Cut tip off cartridge. Cut nozzle to desired size at 45° angle. Screw nozzle onto cartridge. Insert cartridge into
caulking gun.
- Push sealant ahead for uniform bead.
- Clean off excess sealant with M.E.K. or toluene before dry
使用方法:
-施工处如金属表面必须干净 无尘 无脱落油漆 老旧密封胶等物。如有油脂 油渍请先用水清理 干后再封胶。裂缝太深应先填塞垫条再封胶。
-切开管口 再以45度角将嘴切至裂缝大小,套进打胶枪内使用。
-用沾有水的湿布清除多余的密封胶。如胶已干固 用利刃刮除。
-密封胶在10分钟内表干,1小时干透,2天内完全干固23°C 在5MM厚度的相对湿度。
Caution:
Uncured sealant may irritate eyes. In case of contact with eyes, flush with water and obtain medical advice. Use in ventilated area.
注意 :
生锈,渗漏水管上不建议使用:需油漆部位不建议使用 用前先以少量样品测试粘力 以保工程无误,本胶不宜用于密封水底及人行道伸缩缝位!
** DELIVERY TO WEST MALAYSIA ONLY. EXCLUDED PULAU LANGKAWI. CANNOT DELIVERY TO EAST MALAYSIA (SABAH & SARAWAK), BECAUSE IS FLAMMABLE AND LIQUID ITEM. IS DANGEROUS GOODS FOR AIR DELIVER.