Sell Polarizer TV Film Polarizing 19/29/24/32/37/42/46/47/49/52/55/60inch 0/90 Degree LCD Led Repair Tv Replacement Film orig best price

Compatible with Panel LED Tv Samsung, SHARP ,Panasonic LCD ,LG, Sharp, Sony, Haier, Panasonic, Philps, Sanyo, etc. Polarizer TV Film Polarizing LCD Led Repair Tv Replacement Film 22in to 43in Measurement of polarizing film: measurement of screen visibility (length + width) Size (Long*wide) mm*mm 12.1in 249 X 187.5 13.3in 295.5 X 167.5 14in 4:3 288X217 / 16:9 312.5X176.5 15in 306.4 X 230.5 15.4in wide 333.5 X 210 15.6in wide 351 X 200 17in 341 X 273 17in wide 370 X 232 18.1in 366 X 294 18.5in 412.5 X 233 19in 379.5 X 304 19in wide 413.5 X 259.5 / 411.5 X 258.5 19.5in wide 434.5 X 242 20in wide 16：9 446 X252 / 16:10 437 X 275 20.1in 412 X 310 21.5in 479.5 X 271 22in 476.5 X 299.5 23in 16：9 513 X 290.5 / 16:10 505 X 320 23.6in 524 X 297 24in 16:9 535 X 302 / 16:10 522 X 327 26in 328 X 580 27in 610 X 345 32in 714 X 409 37in 834X475 40in 898X510 42in 941 X 534 (945X540) 46in 16：9 1034 X 584 / 16:10 1027 X 584 48in 1080 X 610 52in 1158 X 654 Most laptop and desktop panels use 135 or 45 degrees, while large LCD LED TV screens use 0 and 90 degrees Please confirm the screen size before purchasing More sizes can not be found please contact customer service!! More sizes can not be found please contact customer service!! Membrane change mode First, open the frame of the screen and use a sharp blade to draw a path across the old polarizing film. This makes it easy to rip it out, bit by bit. Then use a soft cloth of alcohol to clean the remaining glue from the screen. It is better to wipe with a dust-free cloth. The key is how to paste it. Take out your new polarizing film, put it on the screen, and turn on the machine to see if there are any images. This is very important. Don't wait until you've posted it, only to find that you've posted it backwards and in the right direction. And then alignment. The new film is first torn apart by 2-3cm, and the two angles of the LCD screen are fixed well. If the whole part is not dislocated, the torn part can be pasted well. Then, tear off a bit and slowly paste it (with a soft cloth finger, I don't have any special tools). This process has to be careful and patient, and it will get the job done very well in about 40 or 50 minutes. Like our products please five-star praise! Thank you very much!