Sell NBZ [Ready Stock] Leakproof concentrate waterproof leaking ,Spray ,glue gum ,liquid ,Tape ,metal, pvc pipe glue and etc best price

The product can be used for waterproof construction of windowsills, exterior walls, toilets, roofs, wood, metal, etc. The transparent color of the product after brushing does not affect the aesthetic appearance of the base surface long-term waterproof, wear resistance and weather resistance Sustain continuous temperature changes from -50°C to +250°C. Liquid1 Liters : Can add on 3 liters Water, Total 4L CRYSTAL GLUE Read before construction 1. AB liquid materials need to be stirred and mixed for construction, which is invalid when used alone 2. Stir and mix well within 1 minute 3. Construct as soon as possible after the mixing is completed, and do not wait for it. Use it within 15 minutes 4. After mixing, the leftover material cannot be stored, it can be used according to the ratio of A:B=2:1 if it is not used up. 5. It is recommended to choose relative content specifications according to the construction area to avoid waste 6. The ground that must be fully dry and completely free of moisture or can be dried with a hair dryer. 7. Do not wet the water for 24 hours after construction. Wet water will cause the crystal glue to not dry. Reminder: apply as soon as possible after mixing, do not wait, because the crosslinking reaction of AB liquid material will produce high temperature when curing, do not touch it directly with your hands to avoid burning your hands After mixing ab, it should be finished in about 10-15 minutes. If the construction is slow, you can do it like this: AB mixed construction. After mixing, you can pour it directly on the place to be constructed. You can pour it in several places, so it won't be solidified so fast. Or if you want to use something to hold for construction, you can use a ceramic bowl to mix it, so it won’t solidify so fast 施工前必读 1、AB液料需要搅拌混合施工，单独使用无效 2、在1分钟之内搅拌混合均匀 3、搅拌完成后尽快施工，不可放置等候，在15分钟内使用完毕 4、搅拌后剩料不可贮存，实在用不完可按A:B=2:1配比混合使用 5、建议按施工面积选择相对的含量规格避免浪费 6. 必须完全干透和完全没有水分的地面，可以用吹风筒吹干。 7. 施工后 24小时不可以湿水，湿水会导致水晶胶不会干。 温馨提示：搅拌完成后尽快施工，切勿放置等候，因AB液料交联反应固化时会产生高温请勿用手直接触碰，避免烫手 ab混合之后 要在10-15分钟左右施工完的。要是施工比较慢您可以这样施工：AB混合施工，混合后可以直接倒在要施工的地方，可以分几个地方倒，省得倒在一起不好施工，这样就不会固化的这么快了。或者您想用东西盛着施工的话，可以用陶瓷的碗来混合，这样也不会固化的那么快了