Sell NAD C368 / C 368 - Integrated Amplifier DAC Bluetooth aptX Airplay MDC BluOS Class D best price

KINDLY PM FOR LATEST STOCK AVAILABILITY BEFORE PURCHASING 1 Year Limited Warranty (T&C applies, warranty excludes human factor damage) Key Features 80W x 2 Continuous power into 8 or 4 Ohms Bluetooth A2DP with aptX supported MM Phono input Analogue line inputs SPDIF coax and optical inputs Speaker A, Speaker B Stereo or Bridge mode configuration Preamp/Subwoofer out Headphone amplifier MDC Slots for future upgrades IR Remote Smartphone Control App 12V Trigger in/out IR in/out RS-232 Serial port for control Control4, Crestron, RTI, URC, AMX, Savant, Elan certified Preamplifier Line Input, Pre Out THD (20Hz-20kHz) <0.005% at 2V out Signal/Noise Ratio >106dB (IHF; A-weighted, ref. 500mV out, unity gain) Channel Separation >80dB (1kHz); >70dB (10kHz) Input Impedance (R and C) 22 kilohm + 100pF Maximum Input Signal >4.5Vrms (ref. 0.1% THD) Output Impedance Source Z + 240 Ohm Input Sensitivity 93mV (ref. 500mV out, Volume maximum) Frequency Response ±0.03dB (20Hz-20kHz) Maximum voltage output – IHF load >4.5V (ref. 0.1% THD) Tone Controls Treble: ±7.0dB at 20kHz Bass: ±7.0dB at 60Hz Balance: -10dB Phono Input, Pre Out THD (20Hz-20kHz) <0.01% at 2V out Signal to Noise Ratio >84dB (200 Ohm source; A-weighted, ref. 500mV out) >76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out) Input Sensitivity 1.44mV (ref. 500mV out, Volume maximum) Frequency Response ±0.3dB (20Hz-20kHz) Maximum Input Signal at 1kHz >80mVrms (ref. 0.1% THD) Line Input, Headphone Out THD (20Hz-20kHz) <0.005% at 1V out Signal/Noise Ratio >110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain) Frequency Response ±0.3dB (20Hz-20kHz) Channel Separation >60dB at 1kHz Output Impedance 6 Ohms General Specifications Continuous Output Power into 4 Ohms and 8 Ohms (Stereo) >80W (ref. 20-20kHz at rated THD, both channels driven) Continuous Output Power into 8 Ohms (Bridge Mode) 300W (at 20-20kHz at THD 0.03%) THD (20Hz-20kHz) <0.03% (250mW to 80W, 8 Ohms and 4 Ohms) Signal to Noise Ratio >98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms) Clipping Power >95W (at 1kHz 0.1% THD) Clipping Power (Bridge Mode) >315W (at 1kHz 0.1% THD) IHF Dynamic Power 8 Ohms 120W 4 Ohms 200W 2 Ohms 250W IHF Dynamic Power (Bridge Mode) 8 Ohms 500W 4 Ohms 560W Peak Output Current >20A (in 1 Ohm, 1ms) Damping Factor >300 (ref. 8 Ohms, 20Hz and 6.5kHz) Frequency Response ±0.3dB (20Hz-20kHz) Channel Separation >75dB (1kHz) >70dB (10kHz) Input Sensitivity (for 80W in 8 Ohms) Line In: 470mV; Digital In: 21% FS Sample Rate up to 24 bit/192kHz Frequency Band2.402G-2.480G Maximum Transmit Power (dBm) 7dBm ±2dBm Weight & Dimensions Gross Dimensions (W x H x D)* 435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)” Net Weight 7.8kg (17.2lb) Shipping Weight 10.1kg (22.3lb) *Gross dimensions include feet, extended buttons and rear panel terminals