Sell MT3 Air Mouse Voice Infrared Remote Control 2.4G Mini Wireless Smart Remote for Android TV BOX PC with USB Receiver Gyro best price

Basic function: 1)The 2.4G keypad function 2)The air mouse control function 3)The Infrared learning function(you can learn it through the 'power' button) Pairing instructions After insert the receiver into Usb interface, hold down the "OK" button and 'menu' button on the remote controller at the same time for about 2 seconds; the LED light quick flashing shows entering the close range pairing mode. The red led light stop flashing to indicate that the pairing is successful. If paired failure, the red LED light flashing and it will enter the sleep mode in 20 seconds. Note: the remote controller and receiver are already paired before packed, do as manual when the remote controller and the receiver cannot use. LED light indicator status 1)Not paired: the red light slow flashes; press any button the red light continuous flashing for 3 times. 2)Pairing: press once, the red light flash once, and hold down the button the light will stay on. 3)Low battery: the red light quick flashes . Stand-by and the sleep mode 1)Not paired: none operation for 5 seconds to enter the sleep mode. 2)Pairing: fail to pairing in 20 seconds, the air mouse will enter the sleep mode directly. 3)In the process of pairing:None operation in 15 seconds it will enter the sleep mode. Special key function instruction ' OK 'button: when the air mouse on, the left button is 'OK' button, when the air mouse off, the 'enter' button is 'OK' button. The virtual mouse function(the gyroscope version can control the cursor movement through body feeling.) Recharge: default the air mouse is off. Press the power button of the mouse to switch to cursor state, long press the direction key(up.down.left.right) to adjustment the cursor location. The voice function instruction (if any, only apply to the voice version) Long press the 'voice' button, turn on the microphone, release the 'voice' button, and turn off the microphone. The voice control function default supports the Google voice system. Infrared learning function 1)Long press the 'OK' button and the 'power' button at the same time for 2 seconds , release them after the red LED light flashes 3 times, the red LED light will stay on. 2)Aim the smart remote controller to the TV remote controller's infrared receiver in close range, the red LED light slow flashes after pressing the button on smart remote controller then press the learning button, the red LED light turn on indicates the infrared learning is succeed, then press the 'OK' button and the 'power' button to quit the learning state. Fail to infrared learning, the air mouse quit the infrared learning status automatically in 30 seconds. Clear infrared code Press the 'OK' button and 'voice plus' button at the same time for 2 seconds, the red light quick flash indicate it sweep away the learned infrared code and restore factory settings.