Sell Motorcycle LCD color screen odometer tachometer, retrofit LCD digital meter, speed, water temperature, ABS fuel gauge best price
5
2
ratings
2
sold
MYR 227.2
5% OFF
MYR 215.84
Ships from | Mainland China |
---|
Product Description
Model Name : CS-1089A1Material Type : ABS materialProduct name : Motorcycle Multifunctional LCD MeterNet weight : 476GInput voltage : DC12VCable length : 58CMUndervoltage alarm : NoneSensor : Sensor, 4 magnets
Product parameterModel: CS-1089A1
Product name: Motorcycle Multifunctional LCD Meter
Net weight: 476G
Material: ABS material
Input voltage: DC12V
Cable length: 58CM
Speedometer: tire circumference 1.85 meters, 4 magnets in a circle, liquid crystal display: 36Hz=63KM/H; when there is a speed, the speed signal light starts to flow;
Tachometer: LCD display: 166Hz to 10×1000r/min
Key Function:
A. Short press the button to switch between total (ODO) and subtotal (TRIP).
B. In the total (ODO) interface, press and hold the button for 8 seconds to switch between metric and inch systems. The default is in metric system. After switching, it can be saved even if the power is completely cut off;
C. In the subtotal (TRIP) interface, press and hold the button for 4 seconds to clear the subtotal
D. In the total (ODO) interface, press and hold the button for 4 seconds to release, enter the clock setting, the hour flashes, the second does not flash, short press the button to increase 1, long press the button for 3 seconds to switch to minutes flashing seconds, seconds If the point does not flash, press and hold the button for 3 seconds to save and exit or automatically save and exit without operation for 10 seconds.
E. Oil alarm: When the oil alarm light is on, switch to the total (ODO) interface, press and hold the button for 8 seconds, the oil light will go out, and the next round of counting will begin.
Clock adjustment: 12-hour system, cold boot at AM10:00, in the total (ODO) interface, long press the button for 4 seconds to release, enter the clock setting, the hour flashes, the second does not flash, short press the button to increase 1, long press Press the button for 3 seconds to switch to the minute second flashing, the second point does not flash, press and hold the button for 3 seconds to save and exit or 10 seconds without operation to automatically save and exit
Backlight: LCD backlight: white; when the high beam is turned on, the backlight brightness is reduced from 100% to 38%
LCD screen: 6 o'clock
Sensor: sensor, 4 magnets
Φ4 round head: gray: 6 gears, 12 negative control, liquid crystal display; green and white: water temperature signal
NOTE:
Before signing, you must first check the packaging, confirm that the packaging is intact, and then sign. If the packaging is damaged, please take a photo((picture of the damaged package and the courier number), and then immediately complain to the transportation company, remember the complaint number, and then contact me, we will definitely serve you.