Sell Mafababe Baby Cradle Electric With Music And Timer Contrller electronic buai buaian bayi elektrik Electronic Baby Cradle best price

Product Name: Cradle Controller ☆The cradle is hooked with the S hook below, and the controller can adjust the speed of swinging up and down. By default, the electronic music ‘‘there is only mother’s good’’, ☆Hanging type is a new style controller, ☆This product is a portable, energy-saving and durable electronic multifunctional cradle controller. It adopts hanging type to move up and down, which has the characteristics of high power, low energy consumption, stable performance, safety and reliability, etc., an upgraded version! There is music and can be timed. (Need to match with cradle) The usage and characteristics of the cradle ☆☆1: The cradle is rocked up and down, so as not to damage the baby's brain ☆☆2: You can control the amplitude of shaking up and down (1-10 gears can be adjusted, gear 1 is the largest, gear 10 is the smallest) ☆☆3: The shaking time can be set (60, 180, 120, 240 hours can be timed) ☆☆4: It can be placed in the living room so that you can look after your baby while doing other things ☆☆5: It's easy to coax your baby to sleep, so you don't need to hug your body every day ☆☆6: The load-bearing range of this machine: within 18KG! ! ♥Use steps: ♥♥1: First of all, please determine the baby's weight. The number of springs used varies according to the baby's weight: 6 kg -12 kg (using 2 springs) 12 kg-18 kg (using 3 springs) 18 kg -24 kg (using 4 springs) 24-30 kg (use 5 springs) ♥♥2: Put the baby and other objects into the cradle, set the controller switch to the ON end, the speed control knob to the O position, and then adjust the time selection knob to the rocking time you need. ♥♥3: Rotate the variable speed knob slowly in the direction where the scale is larger, and pause for 8 seconds for each half of the scale. Observe whether the shaking is suitable, and adjust it until it is suitable. ♥♥4: After the machine is adjusted, the content (weight) in the cradle remains basically unchanged. When you use it again, you don't need to adjust the speed switch, just press the ON end of the switch. After 8 seconds, the cradle shakes normally. The timing knob can be adjusted to set the baby to automatically shut down after sleeping. When the load increases or decreases (or the voltage is unstable or the spring is added), the shaking is inappropriate, the gear shift knob should be adjusted. ☀Notes: ☀☀1: It is found that the transmission rope makes a very loud "pop" sound during the shaking process. You need to reverse the speed control button a little until the "pop" sound disappears, so that the shaking size is appropriate, and the transmission rope can be durable. ☀☀2: Different weight loads (this machine is limited to 18KG) the speed control knob should be adjusted at different scales before shaking. The larger the scale at the position of the speed control knob, the greater the shaking may not necessarily be. ☀☀3: After turning on for 8 seconds, if it cannot be shaken, check whether the wire plug and socket are in good contact,