Sell {LOCAL READY STOCK} MDA APPROVED JUMPER FINGERTIP PULSE OXIMETER (JPD-500E) best price

JUMPER PULSE OXIMETER MODEL JPD-500E (1 YEAR WARRANTY) CHECK OXYGEN SATURATION OF ARTERIAL HEMOGLOBIN (SPO2) AND PULSE RATE JUMPER PULSE OXIMETER is a common device used to check oxygen saturation (SpO2) and pulse rate. It is a small, compact, simple, reliable and durable physiological monitoring device suitable for home use, medical institutions and community centers. The operating principle is based on light transmission through the capillaries, synchronized with the heart pulse. This product is only intended for adults. Not to be used on children, infant and neonatal. CONTENTS: » Main Unit » Grey storage bag » Lanyard/ Hang rope » Instruction Manual » 2x AAA Batteries (included in the box) FEATURES: » Simple one-touch operation » Small, light weight, convenient to carry » LED Display » Infrared sensor - fast & accurate measurement » Fast measurement » Low power consumption » Low battery indicator » Auto power off after 16 seconds when there is no signal » Product Dimensions: 62(L) x 37(W) x 32(H)mm » Projected Service Life: 1 year WARRANTY: 1 YEAR FROM DATE OF PURCHASE APPLIES TO MALAYSIA ONLY (PROOF OF PURCHASE IS REQUIRED) Specifications: Display: LED Digital Display SpO2: Detection scope: 35%-100% SpO2 Accuracy: ±2% (70%-100%) Pulse Rate Measurement Range: 25-250bpm, Accuracy: ±2bpm Pulse Intensity: bar graph indicator Battery Type: 2 "AAA" alkaline batteries 1.5V (NOT included in the box) Battery Useful Life: Two batteries can work continually for 24 hours Working Voltage: DC 2.2V ~ DC 3.4V Power consumption: Less than 35mA Product Dimension: 58(H) x 34(W) x 30(D)mm Weight: About 50g (Include 2 "AAA" batteries) Operating Temperature: +5 to +40°C Ambient Humidity: 15% to 80% RH (non-condensing) Storage Temperature: -10°C to +50°C Storage Humidity: 10% to 93% RH (non-condensing) Operating Atmospheric Pressure: 50Kpa - 106Kpa Colour: Grey & White Body WARNING: » Uncomfortable or painful feeling may appear especially for patient with microcirculatory problem. It is recommended that the sensor should not be applied to the same finger for over 2 hours » The infrared emitted from the device is harmful to the eyes. Do not stare at the light » Enamel or acrylic fingernail polish or other fingernail applications or tattoo may distort and/ or produce inaccurate readings » This device is not intended for treatment Manufactured by: Shenzhen Jumper Medical Equipment Co., Ltd MADE IN CHINA MDA REG NO: GB623841019518 #JUMPER #PulseOximeter #JPD500E #OxygenSaturation #SpO2 #PulseRate #PR #PhotoElectricSensor #OneTouchOperation #LEDdisplay