Sell HDMI Extender over TCP IP 100m / 120m HDMI Extender over Cat5/Cat5e/Cat6 ( FREE GIFT ) best price

HDMI Extender over TCP IP 60m-120m HDMI Extensor over Cat5/Cat5e/Cat6 to UTP Rj45 Network HDMI Transmisson Receiver. One Sender can work with several Receivers in the LAN. Introduction This HDMI over IP Extender is designed to convert HDMI signal to standard TCP/IP and transimit by internet cable or Lan.With the advantage of TCP/IP standard,it can transmit HDMI signal source from HD STB,DVD,Sky HD box, HDMI display card etc to HD projector, DLP,LCD,LED and other audio visual equipments. 1. Apply M-JPEG technology to process image compressing. The loss of image quality is very small;480i@50Hz,480p@60Hz,576i@50Hz,576p@50Hz,720p@50/60Hz,1080i@50/60Hz,1080p@50/60Hz 1080p@24Hz 2. Supported HDMI format: 480i@50Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz 1080p@24Hz 3. HDCP compatible. 4. This HDMI over IP Extender can transmit HDMI 1080P signal to above 120m by using UTP Cat5e/6. 5. It can transmit by Lan. 6. This HDMI over IP Extender supports Lan bandwidth: 100M 7. This HDMI over IP Extender can extend 120m longer by adding one more ethernet router 8. The data could be transmitted over switch, router and other ethernet device, and extend the transfer distance to over 20km. 9. This HDMI over IP Extender also could work in broadcast mode, like HDMI splitter, broadcast HDMI signal from 1 pcs of SENDER support maximum 253 pcs of RECEIVER (over Switch) Harware Installation Note: To achieve optimal performance, a CAT6 cable is recommended. 1. Power off all devices including your HDMI source and display. 2. Connect your HDMI source to the Transmitter's HDMI IN connector. 3. Connect your HDMI display to the Receiver's HDMI OUT connector with an HDMI cable (not included). 4. Connect and link the Transmitter and Receiver by a CAT5/5e/6 cable. 5. Plug the included power adapters into the Transmitter'sand Receiver's Power Jacks, then plug both power adapters into reliable power outlets. 6. Power on your HDMI device and HDMI display. 7. The HDMI Extender is ready for use. FAQ&Solution Q: The TV displays "Waiting for connection..." on the bottom-right corner: A: 1) Check whether the power adapter of Transmitter (TX),Receiver (RX) or Network Switch (if used) is connected. 2) Make sure the Network cable (CAT5/5e/6) is firmly connected between TX and RX. Q: The TV displays "Searching TX ": A: 1) Make sure the HDMI device is connected to the Transmitter (TX). 2) Use other HDMI cables to connect. 3) If still doesn't work, connect the HDMI device to the TV directly to see if there's a signal. Q: The HDMI extender isn't working properly A: 1) Please check the cable lengths are within below: - HDMI cables: 2m - Network cable (CAT5/5e/6): 120m 2) Press the "Reset" button on the TX/RX and reconnect.