Sell Duitmali Gam Kuat Sealant Fix Super Strong Glue for Household Drill Free best price
4.9
520
ratings
801
sold
MYR 9
86% OFF
MYR 1.3 - MYR 1.6
| Brand | No Brand |
|---|---|
| Ships from | Kuala Lumpur |
| TYPE | Sealant Fix UHN |
Product Description
"Buat Apa Nak Guna Paku dan Drill, Kalau Ada Yang Lebih Menyenangkan ??"
Tak Perlu Buang Duit Untuk Beli Peralatan Lain Yang Menyusahkan.
Anda Cuma Perlu Lekatkan Sahaja Guna Gam Tanpa Merosakkan Dinding Rumah Anda Lagi.
*KEISTIMEWAAN PRODUK*
(1)Tiada Bau Dan Bahan Kimia Berbahaya
(2) Melekat Dengan Sangat Kuat!
(3) Bebas Dari Kerosakan Dinding
(4) Inovasi Terbaru Menggantikan Penggunaan Paku Dan Drill
(4) Menampung Beban Hingga 23KG!
(5) Kandungan 12 Gram 1 unit boleh lekat lebih kurang 5 barang
*SOP GUNA*
1. Cuci permukaan dinding dari habuk / kotoran.
2. Pastikan permukaan kering
3. Picit gam mengikut kesesuaian. Pastikan tidak terlalu sedikit / terlalu banyak
4. Berikan tekanan teguh pd selama 10-30 saat
5. Biarkan gam mengeras sekurang-kurangnya 12jam. Utk ketahanan lama (barang berat), biarkan selama 72jam
6. Gunakan solatip utk pastikan brg tidak bergerak ketika gam mengeras
*SOP TANGGAL GLUE*
1. Panaskan permukaan gam menggunakan har dryer.
2. Struktur gam akan lembut pd suhu 50deg C & mudah ditanggal
.
★★★SPECIFICATION
Volume: 12g
Color: porcelain white
Viscosity: 300maps
Shear strength: 8000mpa
Curing method: curing at room temperature
Construction temperature: minus 20 degrees - 50 degrees
Shelf life: 24 months
Storage: cool place
★★★FEATURE
1. 100% Brand new & High quality
2. Can support up to 100kg weight
3. Without digging holes, Protect the wall.
4. Easy to use. Non-toxic, no solvent, no pollution, no corrosion, aging resistance
★★★INSTRUCTIONS FOR USE
1. Clean the construction surface to ensure no oil and stains, keep surface clean and dry.
2. Pierce the nozzle with the nail on lid.
3. Apply the glue evenly on the adhesive surface.
4. Press the side with glue to the adhesive side and press both.
5. Pull both sides apart and press again, repeat this action for 10 seconds.
6. Press both together again and tap gently along the joint.
7. Stick the tape to fix it and remove the tape after 48-72 hours.
8. Unused glue, cleaning the rubber mouth, cover the lid and seal it.
★★★PRECAUTIONS
1. Use the nail on lid to open the glue.
2. Spread evenly, not too much or too little.
3. Pull both sides and press again to fix it more firmly.
4.Auxiliary stickers can be replaced with tape.
★★★APPLICATION
Frosted Glass, Marble, Lacquer Wood, Smooth Metal Plate, Ceramic Tile, Mosaics
#superstrongglue
#Gamkuat
#Allpurposeadhesive
#glassglue