Sell DIY Candle Making | Cotton Candle Wick/Wick Tab best price

We offer a range of candle wicks that are being used by candle manufacturers for different sizes of candle production. As the wicks are made of pure cotton with no supporting materials inside, it is recommended to clip the wick to a supporting stick placed on the top of your candle container; or you could immerse the wick into melted paraffin wax to coat it as a support. The wick holders that we offer are made of metal. For round holders, please insert the wick through the center hole and use any relevant pliers to firmly clip down the wick in place (clip at a 45° angle at the top of holder neck as shown in picture to minimize warping of the holder base); for rectangle holder, please place the wick horizontally with one end slightly over the center hole and bend the metal strip over as shown in picture to clip the wick in place using any relevant pliers. Wick options: 5.5mm, 4.0mm, 2.8mm, 2.0mm, 1.8mm, 1.0mm Please add up order quantity according to your desired length to purchase (e.g., 4.0mm x 1 meter x 3 quantity = 3 meters of 4.0mm wick as a whole) Holder options: Round 2.5mm(hole diameter), Round 3.0mm(hole diameter), Rectangle(for 4.0mm, 5.5mm wick) Packaging size: 60pcs (Round), 20pcs (Rectangle) Please add up order quantity according to your desired amount and we will pack it in one bag for each option (e.g., [ Round 60pcs x 3 quantity ] + [ Rectangle 20pcs x 4 quantity ] = 1 bag of Round 180pcs + 1 bag of Rectangle 80pcs) *If you wish to order for a larger odd size, please contact and discuss in detailed with us. *If you have any suggestions on our products or services or anything else, please let us know and we will try our best to make improvements on it. *If you have any business intention to buy or source for a certain material in large commercial quantity or in bulk, please feel free to enquire us.