Sell Digital Temperature Humidity Controller Regulator Thermostat Hygrostat Thermometer Hygrometer Control with Humidity best price

Product Description Control range:1%RH-99%RH Load power:10A/AC220V Measurement range:-20℃~80℃ Humidity range:1%RH-99%RH Measurement error:±3%RH(environment temperature at 25℃) Temperature precision:1℃ Humidity precision:1%RH Display accuracy:1%RH Power Supply:DC12V//220V(Choose) Output type:10A relay output probe type Temperature: NTC precision ±1℃ Humidity:resistance type sensor precision ±3℃ Dimension:90*60*26.5mm(L*W*H) Temperature control object:one channel temperature(heating and refrigeration ventilator) Or humidity(Dehumidify or humidify electrical appliance) Probe line length:standard 1.5m Permanent memory of parameter:set the all parameter with permanent memory Power failure at the operation time:run after the power supply. Working environment: temperature 0-55℃ humidity90%RH without condensation Humidity control setting:Press Set keyboard one time,press three second enter into setting menu after humidity display flashing,it will display code HC.Press "▲ "keyboard or "▼"keyboard can cyclical selection HC-CP-PU-CA-HP parameter code.Please press Set keyboard if you need enter into a code,press "▲ "keyboard or "▼"keyboard to modify the required numerical for five seconds then return automatically. Press "SET" keyboard twice enter into setting menu after temperature display flashing,and display code HC,press "▲ "keyboard or "▼"keyboard can cyclical selection HC-CP-PU-CA-HP parameter code,please press "SET " keyboard if you need enter into one code ,press "▲ "keyboard or "▼"keyboard to modify the required numerical for five seconds then return automatically. Dehumidification control: The way of mode control (code HC) it will be dehumidification control when setting as C.For example,set the humidity control value as 50% RH and humidity difference as 5%,relay start output,When environment humidity value ≤setting humidity value(50%RH),relay close output. Damping control:The way of humidity control (code HC) ,set H as damping mode,for example,set the humidity control value as 50%RH and humidity difference as 5%RH. When temperature humidity value ≤setting value(50%RH)-difference/(5%RH) ,relay start output.when temperature humidity ≥setting value(50%RH),relay stop output. HC:mode selection,H means humidifying mode,C means dehumidificatio mode. D:return difference, start the humidify when in the humidifying mode=displaying humidity-return difference.start the humidify when in dehumidification mode=displaying humidity + return difference. PU:Delay to start.when relay stop output and start timing.the interval time of next boot must greater than delay start time to avoid start frequently. HP:Humidity upper limit alarm:when humidity exceed upper limit alarm,digital tube displaying "-H-",humidity lower than alarm setting value it will return back from alarm automatically. LS;Humidity lower limit alarm:When humidity exceed lower limit,digital tube display"-L-",humidity higher than alarm setting value it will return back from alarm automatical