DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (1)
DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (2)
DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (3)
DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (4)
DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (5)
DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (6)
DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module (7)

Sell DC 12V Digital LED Display Cycle 0-999 Delay Relay Module Timer Relay Adjustable Module best price

5
4
ratings
12
sold
MYR 15.38
11% OFF
MYR 13.64
Ships from
Mainland China
Color
black shell
white shell

Product Description

Name: T2302 Time Digital Relay Working voltage: DC12V Relay: 20A Timing range: 0-999 seconds, 0-999 minutes, 0-999 hours Working mode: delay on, delay off, timing on, timing off, cycle on, cycle off Instructions: Please pay attention for your first use.You need wait 6s after your setting data, the module will save the date you have set after 6s. Short press button SET: If you start the time setting mode, Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button-. Please wait 5s after your setting date, the module will save the date you have set after 5s. Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice: P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1, you could set the timing mode by the button+ and button P0--0: Timing time mode: 0---999s. P0--1: Timing time mode: 0---999min. P0--2: Timing time mode: 0---999h. P1--0: The relay will connect after you delay the T1 time. P1--1: The relay will disconnect after you delay the T1 time. P1--2: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, it finish. P1--3: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it finish. P1--4: The relay will connect after you delay the T1 time first, Then the relay will disconnect after you delay the T2 time, it is cyclic. P1--5: The relay will disconnect after you delay the T1 time first, Then the relay will connect after you delay the T2 time, it cyclic. Example: A customer needs 10 seconds to start up and 20 seconds off. Setup is as follows: T1 set time 10, T2 set time 20 P0--0 (T1 time range is seconds) P1--5 (timer work mode) Size: 4.8x2.9cm / 1.89x1.14inch Note: 1. Transition: 1cm=10mm=0.39inch 2. Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid. 3. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package: 1 x Timer Delay Relay

From the same shop

Related items

You may also like