Sell DBX 234XL Stereo 2/3 Way, Mono 4-Way Crossover Audio processor Equalizer dbx DriveRack Loudspeaker Management System best price

Specifications Input Connectors XLR Input Type Electronically balanced/unbalanced, RF filtered Input Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input >+21dBu balanced or unbalanced CMRR >40dB, typically >50dB at 1kHz Output Connectors XLR Output Type Impedance-balanaced/unbalanced, RF filtered Output Impedance Balanced 200 ohm, unbalanced 100 ohm Max Output >+21dBu balanced/unbalanced into 2k or greater Bandwidth 20Hz to 20kHz, +/-0.5dB Frequency Response < 3 Hz to > 90 kHz, +0/-3 dB Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth Signal-to-Noise (Stereo Mode) >94dB (Low Output), >93dB (Mid Output), >92dB (High Output) Signal-to-Noise (Mono Mode) >94dB (Low Output), >94dB (Low/Mid Output), >92dB (High/Mid Output) Dynamic Range > 114 dB, unweighted, any output THD+Noise < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz Interchannel Crosstalk < -80 dB, 20 Hz to 20 kHz Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); High-Mid/High: 450 Hz to 9.6 kHz; Low-Mid/High-Mid: 450 Hz to 9.6 kHz Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. Phase Invert Switch Inverts the phase at the output, one switch per output. x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. Mode Switch Selects stereo 2-way or mono 3-way operation and disables all LEDs for controls that are non-functional in the selected mode. LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2�s low output phase invert LED to indicate that this output is not operational in the LF sum mode. Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) Operating Voltage 100-120 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC 50 Hz Power Consumption 15W Power Connector IEC receptacle Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) Unit Weight 4.0 lbs. (1.8 kg) Shipping Weight 5.8 lbs. (2.6 kg)