Sell Canon MP258 Motherboard Mainboard MP258 MP258 MP258 11Pin Printer Board Mainboard best price

Canon MP258 Printer Board, Canon MP258 Mainboard, MP258 11 PIN Used Motherboard | Printer spareparts | Pinboard Printer Canon MP258 11 Pin Mainboard, MP258 Motherboard, Logic Board MP258 Printer For Mainboard Canon MP258 there are 2 types including 11 pins and 13 pins, for both models are actually the same, only the ones distinguish on the number of pins connected to the panel. If the mainboard that has the number of pins does not match, it can be purchased panel keys and flexible cables as needed Mainboard characteristics MP258 11 pins: Pcb color / The playboard is green and yellow Number of flexible cables connected to 11 pin quantity panels Please make sure that the Mainboard in order is appropriate that is attached to the printer. Mp258 Mainboard Condition: Board with 11 Pin Used Already tested 100% Normal Mp258 Support Printer Mainboard: Canon PIXMA MP258 Characteristics of general damage in case of damage to the board: - Total Off - Blingking - Not Detect Cartridge Mainboard condition: 1. The Epson playboard sold we've tested and flame 100%. 2. The playboard is already adjustment / Initial settings Installlation of the printer mainboard is MUST be done by experienced printer technicians, not by user or layman technicians who have minimal experience in installlation of mainboard epson, installation errors may result in consulting total dead printers. Do the mainboard flame test ONLY by connecting power supply and FLEXIBLE control panel connector (FLEXIBLE HEAD CABLE AND SENSOR MAY NOT INSTALL), then turn on and if the mainboard is on and if the mainboard already lights up means normal mainboard then unplug the power cord Connect the flexible cable HEAD to the mainboard (PLEASE MAKE SURE NORMAL HEAD PRINT IS NOT SHORT), flexible cable mounting please make sure it is not oblique. If installation matches the procedure and it is correct confirmed that the mainboard will turn on and function perfectly. However if after installing the printer directly dies, or turning on for a while and then off most likely your PRINT HEAD is short/zipper resulting in total dead mainboard marked by breaking up TRANSISTOR and IC POWER.