Sell Btsg Logic Probe TTL CMOS Pulse Storage Logic Tester LP-1 best price

Logic probe high frequency response DTL TTL CMOS pulse storage logic tester LP-1 Characteristics: - Convenient, quick and easy For DTL, TTL and CMOS - High Frequescy response - Immediate instructions - Pulse memory function How to use: - Connect RED clip+terminal and BLACK clip - test terminal circuit power supply.Power supply voltage shall not exceed 18V DC - For TTL and DTL, set up the select switch to the side marked "TIL" For CMOS, set up the selection switch to the side marked "CMOS" and contact the probe for testing. The led indicator displays its logical state: (a) All LED OFF - high impedance (b) Red light - gaubon (1) (c) Green LED ON - low (0) (d) Orange light - pulse - For deteching and storage PULSE or horizontal transition, the lower selection switch side is marked "PULSE" first.The probe was exposed to POIN for testing. The led indicator specifies the basic state.Then mark the side of the down switch as MEM, and the orange LED detects any pulse or level transition to light.The direction of the pulse is determined by CABE compared with the original basic, state.After use, return the reset logic probe side marked "PULSE" by setting the selection switch The package includes: 1 x logical probe