Sell B-Bond PVC Solvent Cement (100gm & 500gm) best price

B-Bond PVC Solvent Cement (100gm & 500gm) DIRECTION : - Make sure that the surfaces must be clean, dry, free of dirt, grease, oil or water. Clean pipe and fitting - Stir the cement before use. - Apply the B-BOND PVC Solvent Cement on both the surfaces with a dry and clean brush to give a uniform coating with heavier coat at the pipe ends. - Allow the solvents to evaporate until the cement film is "tacky". It will take between 3 to 5 minutes depending upon weather condition. - Position the coated surfaces accurately before assembly. - Hold firmly for few seconds to allow initial bonding, then wipe on surplus cement. - Allow 24 hours before testing on pipe to 2". Allow 48 hour on pipe through 6". Longer cure time may be required on damp, Cold day.