Sell 【AW】 1set SMY-W2001 Temperature Controller Intelligent Digital Display Electronic Temperature Control Switch Socket best price

Description: Name: Switch Socket Series: 220 V Package: electrostatic bag Application fields: Electrical Engineering, electrical appliances Purpose: digital temperature control Power: 250v10a Product Name: Microcomputer temperature controller Product model: xk-w2001 Temperature range: - 50 ~ 110'c Temperature control range: - 50 ~ 110'c Temperature measurement accuracy: 0.2'c Temperature control accuracy: 0.1C Measurement input: ntc10k L = 1m waterproof probe Input power: 110V-220V (International Version) Output power: 1500W Output type: direct output Output capacity: up to 10A Appearance size: 120 * 59 * 30MM PO setting start temperature Press the setting button once to enter the internal menu, the default display is PO, press the setting button again, and set the required startup through the up and down buttons temperature. P1 set stop temperature Press the setting button once to enter the internal menu, the digital display is PO, switch to P1 through the up and down buttons, and press the setting button again to pass Set the required stop temperature by pressing the up and down buttons. P2 set temperature correction Enter the internal menu in the same way, switch to P2 by pressing the up and down buttons, press the setting button again, and set the required calibration through the up and down buttons temperature. In the setting, if the detected temperature value is 0.5°C larger than the actual temperature value, then the calibration temperature that needs to be set is -0.5°C. If check The measured temperature value is 1°C lower than the actual temperature value, and the calibration temperature that needs to be set is 1°C. Detection temperature + correction temperature = actual temperature. P3 set delay start Enter the internal menu in the same way, switch to P3 through the up and down keys, press the setting key again, and set the required delay time through the up and down keys Time (in minutes). Delayed start is generally used for compressor refrigeration. If it is used for refrigerators and freezers, this value needs to be set. The return pressure of the retractor is generally set to 3-6 minutes. If you are not used to control the compressor or do not need the delay function, just skip this item Packing list: Switch Socket*1 Note： 1.Please allow 0-1cm error due to manual measurement. Please make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item.