Sell Air Pump Compressor Filter Regulator Trap Pneumatic Oil-Water Separator Pressure Manual Drainage Supply AC2010-02 SMC/AFC2000 best price

Features: *Using standardized modular design, it can be combined and decomposed arbitrarily, the product design is reasonable, easy to use, and can meet the requirements of various pneumatic systems. *Transparent inspection hood, you can directly observe the size of dripping oil and water accumulation. *High-strength resin (polycarbonate) protective cover, safe and reliable to use . Specifications: Product name: Pneumatic air filter regulator Condition: New Fluid: Air Filter Aperture: 25 μm Cup Material : Polycarbonate Proof Pressure: 1.5Mpa(15.3kgf/ cm²) Max Working Pressure : 1.0Mpa(10.2kgf/ cm²) Ambient & Fluid Temperature: 5-60°C Recommended Lubrication: Turbine No.1 oil (ISO VG32) Dimension: 16x16.5cm Package Include: 1 x Pneumatic air filter regulator Install And Use: The installation of the filter should make the drainage mechanism vertically downward and keep a certain distance from the ground for drainage and replacement of the filter element. The filter is used to filter solid impurities and water droplets in the compressed air. It cannot filter out aerosols and water vapor. Therefore, the filter position should be set after the air dryer, as close as possible to the pneumatic components that need to be supplied with air. The condensate in the filter bowl should be drained regularly. If manual operation is inconvenient, you should consider choosing a filter with an automatic release mechanism. Check the blockage of the filter element regularly. When the pressure drop is greater than 0.05 MPa, it should be replaced in time. For washable filter elements, you can continue to use them after washing. The filter bowl should be cleaned with a neutral cleaning agent, and organic solvents are strictly prohibited.