Sell 20W 18V Solar Panel Kit with Controller, Solar Charger for Smartphone, Camping, Car, Boat, RV Complete Solar Panel Kit Portable Cell Phone Charger Motorhome best price
5
2
ratings
1
sold
MYR 73 - MYR 110
Ships from | Mainland China |
---|---|
Size | Only Solar Panel with 10A Controller with 20A Controller with 30A Controller with 50A Controller |
Product Description
Material: monocrystalline silicon
Size: approx. 23cm x 17cm / 9.0x6.6 inch
Maximum power: 20W
Maximum protection level: 1.11A
Maximum voltage: 18V
Characteristics:
1. Durability, waterproof and long lasting.
2. Lightweight and easy to use, and easy to carry.
3High conversion rate, high calculation efficiency, excellent efficiency.
4. Use overload protection, protection in the opposite direction.
5. Low noise, high efficiency.
6.Ideal for outdoor cycling, hiking, trekking, camping, travel, etc.
Notice:
-Please allow 1-3cm error due to manual measurement and make sure you don't mind before ordering.
-Please understand that the colors may exist different chromatic differences as the placement of the images.
Parameter controller:
System voltage: 12V / 24V
Rated load current: 10A / 20A / 30A
Rated discharge current: 10a
Control method: pulse PWM modulation
Power display: Yes
Light control + delay: Yes
Discharge cut-off voltage: 10.7V (adjustable)
Discharge recovery voltage: 12.6V (adjustable)
USB output: 5V / 2.5A * 2
Standby current: <10mA
Working temperature: -30 ℃ + 60 ℃
Size: 133x70x35mm
Net Weight: 131g
Security instructions
1. Make sure the battery has enough voltage for the controller to recognize the battery type before the first installation.
2. The battery cable should be as short as possible to minimize loss.
3. The regulator is only suitable for lead acid batteries: open, AGM, GEL (not suitable for nickel metal hydride, lithium ion or other batteries).
4. The charge controller is only suitable for regulating solar modules. Never connect another charging source to the charge controller.
System connection:
1. Connect the battery to the charge controller-plus and minus. It will show 1, if it detects 12V battery, 2 if it detects 24V battery.
2. Connect the PV module to the regulator-plus and minus.
3. Connect the consumer to the charge controller-plus and minus.
The package includes:
1*solar panel
1*Small battery clip
1*controller (optional)