Sell 【2 x 15ML】ARALDITE STANDARD RAPID STEEL HIGH PERFORMANCE EPOXY ADHESIVE GLUE / Gam best price
4.9
100
ratings
100
sold
MYR 9.9
Brand | Araldite |
---|---|
Ships from | Kuala Lumpur |
TYPE | STANDARD(90MINUTES) RAPID(5MINUTES) RAPID STEEL(4MINUTES) |
Product Description
ARALDITE® STANDARD 2 X 15ML
Important
Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).
Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent. During assembly apply light pressure to the joint until set (clamps, tape) around 8 hours. Allow 14 hours to attain full strength before rough handling or sanding.
How to apply
Araldite® Standard is a strong 2-component epoxy with long working time. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High temperature resistance (-30°C to 65°C). Withstands rough handling. Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rear-view mirrors to car windscreens.
ARALDITE® RAPID 2 X 15ML
A strong, long lasting solvent-free adhesive which is water resistant and can be painted or sanded.
Important
Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).
Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent. During assembly apply light pressure to the joint until set (clamps, tape) around 20 minutes. Allow 2 hours to attain full strength before rough handling or sanding.
How to apply
Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. High temperature resistance (-30°C to 80°C). Oil, chemical and impact resistant. Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rear-view mirrors to car windscreens.
ARALDITE® STEEL 2 X 15ML
Important
Bonds most types of metal including steel, galvanised steel, cast iron, aluminium, iron, copper and brass. Will also bond non-metallic materials, such as ceramic, wood and glass.
Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent. During assembly apply light pressure to the joint until set (clamps, tap) around. Handling time 1 hour. Allow 2 hours to attain full strength before rough handling or sanding.
How to apply
Araldite® Steel is a strong 2-component epoxy with fast setting. Will not rust. Metallic grey colour. Fills gaps for uneven breaks. Parts repositionable for 4 minutes. Oil, chemical and impact resistant. High temperature resistance (-30°C to 100°C). Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rear-view mirrors to car windscreens.
Storage
Should be stored in a dry place at room temperature in the original syringe.