Sell 1Kg Pentens T-007 Cement Modifier 防水底层涂料 WP Primer Waterproofing Coating ~ 1L 1Liter Sealer Undercoat Based Repair Bocor best price

✨If the customer wants to choose the service of self-pickup, please choose other "others" (West Malaysia) in the logistics options. The address for self-collection is as follows: 如果顾客要选择自行取货的服务，请在物流选项选择其他“others”(West Malaysia)自行取货的地址如下： Sekiranya pelanggan ingin memilih perkhidmatan mengambil barang sendiri, sila pilih "Others" (West Malaysia) logistik. Alamat untuk pengambilan sendiri ditunjukan di bawah: 盛丰五金门料漆料有限公司 SENG HOONG HARDWARE TRADING SDN BHD 27 JALAN INDAH 8/13, TAMAN BUKIT INDAH, 79100 ISKANDAR PUTERI JOHOR BAHRU ，JOHOR +60 17 7588 178✨ ____________________ 商品描述 PENTENS T-007 is acrylic emulsion which is a excellent bonding adhesion/primer and a excellent modifier of cement to improve the chemical, corrosion, moisture and salt resistance of cement renders. Features : - Good wetting, penetrating and bonding on porous concrete surface - Waterproof - Suitable for use in contact with drinking water - Increases abrasion resistance of mortars - Increase tensile, flexural, impact & compressive strengths of mortars - Increases durability of concrete and mortars Uses : - Bonding Adhesion/Primer of water-based waterproofing/flooring/painting works - Mix with mortar to repair and resurface of factory floors drive ways, angle fillets - New and old concrete bonding agent Surface Preparation : All the surfaces must be clean, free from grease, oil, laitance, and remove all the dirt and contaminants, which might affect adhesion. The impurity outside the structure body should be cleaned thoroughly. Application : Substrate should be primed with a 1:3 mixture of PENTENS T-007 and water. Brush on at the approximate rate of 0.3 kg/m². Allow to become tacky then apply topping. For porous surfaces prime with a slurry coat (refer Specifications for mix recommendation).