Sell 10A WATER PUMP AUTOMATIC ON OFF SWITCH PUMP CONTROLLER OMRON RESISTOR OKAZAWA BOSSMAN LEO PECKER BQB-60 Kamu TSUNAMI best price

The Electronic Controller PC10 orders the automatic start and stop of the water pump when opening or closing any tap or valve of system. The controller can keep constant pressure and water flow in the system as long as any tap in the system is open during the pump operation. FOR SINGLE PHASE PUMPS WITH MAXIMUM CURRENT 10A FEATURES: Rated voltage: 220V-240V Max. Current: 10A Frequency: 50Hz Max. Power: 1.1KW Starting pressure to choose: 1.5 bar Max. Working pressure: 10 bar Protection grade: IP65 Joint screw: R1" Max. Operating temperature: 60 degree centigrate Coverage : As a completely new device, it can guarantee the Optimum control of electric pumps used in a plumping systems. Being an intelligent mix of hydraulic and electronic engineering. The control maintains both pressure and flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge an no irritating variation in pressure and in flow at the point of use. No adjustment or maintenance is required, it is absolutely dependable durable and simple to install.Function- The starting operation archived. The unit is programmed to perform all the pump control operations automatically. When particular operational breakdowns occur, such as water failure, obstruction of the suction pipe, etc., the unit recognizes the breakdown and red LED failure lights up, at the same time a stop signal is sent to the pump to prevent damages caused by its working in the absence of water.Rectification of the failures that have caused the blockage, allows the system to be restarted by pressing the reset button-